• Home
  • Line Cards
    • Supplies
    • Lighting
  • Training
  • What's New
  • Catalogs
    • Digital Catalogs
  • COVID-19 Updates
  • Contact Us
  • About Us
  • Lighting
THEA ENTERPRISES
  • Home
  • Line Cards
    • Supplies
    • Lighting
  • Training
  • What's New
  • Catalogs
    • Digital Catalogs
  • COVID-19 Updates
  • Contact Us
  • About Us
  • Lighting

What's New

Bending Conduit? Save time with Wiegmann's corner trough.

11/19/2020

 
The Wiegmann Corner Wire Trough line provides new options for wire distribution installations!

​Wiegmann's new wall or ceiling mount Corner Trough line gives your contractor customers new options for wire distribution installs. It mounts in any corner to take up less room on the wall.
 These products are about making installs faster and easier. Conduit can run through six different sides with no need to bend conduit. Plus the angled cover provides wide open access, making it easier to pull wires. The new design features keyhole slots on the cover, allowing you to remove the cover without fully removing the stainless steel screws.
 Plus six sizes offer a unique feature for this type of product--knockouts!
Concentric knockouts are offered on front and bottom panels. Saves even more time and effort for installers on commercial or industrial applications.
Picture
Picture

Taymac Outdoor #Havefunoutthere

11/10/2020

 
Deck Outlet Cover and Kit
 
The TayMac Deck Outlet Cover Complete weatherproof outlet kit for raised outdoor floors lets you place convenient power access where you need it! Included cover, electrical box and receptacle create a cost-effective upgrade for today’s outdoor living. Homeowners get safe, code-compliant power protected from water spray, rain or snow. Suitable for lights, fans, device charges and other electric appliances.
 
Kit Features:
​One weather/tamper resistant 15A GFCI receptacle
  • One weatherproof cover constructed of heavy-duty UV-resistant polycarbonate
  • One metal electrical box with ½” threaded outlets and gasket
  • Low profile design with beveled edge and slip-resistant texture meets ADA standards
  • Rain chamber and “drip loop” design provide two levels of in-use protection
  • Pre-attached gasket keeps water from entering around self-closing lid
  • Cord hooks hold two power cords (up to 16 gauge) in place
For use on wood or composite raised decks and porches
Picture

Hinged Mud Rings from RACO

2/3/2020

 
​RACO Hinged Mud Rings speed up installation while ensuring that devices mount flush to the wall surface. The hinged design allows switches and outlets to be attached to the ring first, which then swings out of the way for wiring. This frees up both hands for the installer. Design also allows the ring to mount to the 4” square box without removing screws. Maintains code-compliant installations.
Unique design allows for mud ring to be opened in the field
Hinged design allows easy and quick access to install conduit connectors and wiring
For use on 4" square boxes
Mounts to box without having to remove screws
Raised fonts for 1/2" to 1-1/2" wall thickness
Accepts all standard devices
Picture
More Pr Information: https://hubbellcdn.com/sellsheet/RA_SEL_HMR-443.pdf
Picture

NEW Deck Outlet Cover from TAYMAC

12/16/2019

 
DOC320Z
DOC320W
DOC320G
TayMac's new DOC320 Deck Outlet Cover provides a safe way for your contractor customers to add an electrical outlet to a raised deck floor. It helps homeowners avoid long cords, which pose tripping hazards. Protect standard devices (duplex or GFCI) from water spray, rain or snow. Power lights, fans and electric appliances. 

The low profile design with beveled edge and slip-resistant texture meets ADA guidelines. A rain chamber and "drip loop" design with wide drip holes provide two levels of protection in-use. Cord hooks hold cords in place below the gasket lid, to ensure a tight fit. 

CAT #s
DOC320Z 
DOC320W 
DOC320G

Flush Fit Leveling Plate from RACO

12/6/2019

 
Picture
Loose, sunken or crooked devices? Help contractors level things out with the Flush Fit Leveling Plate. It quickly and securely brings any device up to level. Easily repair electrical outlets that are recessed too far into the wall.

CAT # 
​999 

BELL's NEW Weatherproof Junction Box

10/25/2019

 

Safely Support Ceiling Fans or Luminaires

  • 4" round box
  • Heavy-duty PVC with integrated galvanized steel support
  • Mount parallel, perpendicular or 45° from joist 
  • Optional Rain Collar provides weatherproof seal for fan canopy
  • Supports fans to 70 lbs or luminaires to 150 lbs.
  • Five 3/4" threaded entries provide convenient access
  • Includes reducer bushings, closure plugs, mounting hardware
  • Available in Gray, White or Bronze

CAT #s 
PRCF57550BZ 
PRCF57550WH 
​PRCF57550GY

Introducing the NVL Series from Hubbell Killark

10/22/2019

 

Corrosion Resistant Fixtures for Harsh & Hazardous Environments


Ideal for buildings with high ceilings in need of clear, efficient illumination, Killark's NVL Series come in a variety of configurations so you can find the fixture that suits your hazardous area needs. Their standout, hazardous area lighting fixtures are designed with safety and reliability at the forefront so you can enjoy the quality of Killark for many years to come.​

Ideal for Tight Spaces 
The compact and high strength body of the NVL is perfect for tight spaces where the fixture may be impacted, and the polycarbonate lens and bright output LEDs will help ensure exceptional visibility.
Corrosive Environments 
In highly corrosive environments the NVL’s non-metallic body is designed to resist the corrosive effects of most chemicals, hydrocarbons, and solvents.
Marine Applications 
The non-metallic housing makes it perfectly suited for marine environments.

NVL Series

Push-in MC Cable Clamps from RACO

10/3/2019

 

Rugged one-piece design provides fast tool-free install

Simply insert a cable, snap the box end into any 1/2" inch knockout, done! No tools needed for a secure assembly. Makes installing MC better for your customers. Both models can also be removed and reused.

​These connectors add STAB-iT® functionality to any standard box. The 38RAC is for terminating MCI, MCI-A, AC, HCF and FMC. The 40RAC is tinted blue inside to indicate it's also suitable for MC-PCS in smart building applications. 

• Rugged one-piece design
• Corrosion-resistant zinc plated steel
• Pre-assembled nylon anti-short bushings won't fall out
• For use in dry locations
​
CAT #s
38RAC 
40RAC

Luminary Cable Connector NEW from RACO

8/13/2019

 

Insert Control Wires and Snap Shut

Picture
RACO's new code-compliant Shield-IT™ connector is for use in splicing the double jacketed control/signal conductor pairs in MC-PCS cable.   The shielding wings provide the necessary separation between power and control conductors inside of the electrical box or enclosure,  as per the NEC article 725.136(B) or 725.136(D). Its unique design lends to a quick, safe, and secure installation. Perfect for dimming control, low voltage lighting and smart building applications.

• Code saver
• Reduce wiring time by 75%
• Easy to install wires - no twisting, taping, or crimping required
• Splices 16 AWG Solid Copper wire ONLY
• Handy strip gauge ensures a perfect strip every time
• Simply strip wires, push in, and click to close shields
• Clear housing for easy visual inspection
• Construction: Polycarbonate base, Brass contacts, Nylon shields
• Max voltage 600V
• Temp rating 105° C

CAT #s 
MCPCS4 
MCPCS4J 
MCPCS6 
MCPCS6J 
MCPCS8

RACO's New Universal Split Insulating Bushings

8/3/2018

 

Don't Sweat It, Just Split It

Picture
RACO's new Universal Split Insulating Bushings can be installed after wires and cables are pulled. The innovative design lends a quick and easy installation, especially where space is limited!

  • Install on fittings, threaded or unthreaded Rigid/IMC, or EMT conduit
  • One-piece design: no need to fumble with extra pieces!
  • Code saver
  • Patent pending locking mechanism and hinge
  • No more damaged bushings during wire pulling
 
Cat. No.
1410USP
1412USP
1414USP
1416USP

Introducing TayMac’s Largest In-Use Cover

7/20/2018

 
Picture
The new MM7420 Jumbo Weatherproof In-Use Cover is the deepest nonmetallic Extra Duty cover TayMac has ever made. ¼” more depth than the deepest TayMac Nonmetallic In-Use Cover.
  • High-impact polycarbonate construction provides maximum durability
  • 55-in-1-configurations
  • Lockable tab (fits up to 1/4" shackle)
  • Installs in under one minute with patented Quick-Fit keyhole mounting system
 
Cat. No.
MM7420C
MM7420G

AVAILABLE NOW Bell’s New Outdoor Decorator Switch Covers

3/16/2018

 

Weatherproof Decorator Switch Cover

Picture
Bell has introduced a series of weatherproof decorator style switch covers. These are the FIRST products of their kind on the market, offering convenience and weatherproof safety for outdoor lifestyles.
  • Convenient on/off rocker functions
  • Weatherproof protection
  • Compatible with single pole or 3-way Decorator switches
  • Will mount to any standard Decorator switch

These new covers provide homeowners with an easy solution to upgrade to contemporary switches for today's outdoor living. Attractive appearance combines with ease of use.

Applications include exterior wall mounted patio and deck lighting, BBQ islands, pool & spa controls and more.
Bell's new covers are available in single gang, 2 gang or 3 gang models. Single gang colors include gray, white or bronze. Also available is a kit with a gray single gang cover and a 15A single pole Decorator device.
 
Cat. No.:
5122-0
5123-0
5123-1
5123-2
5127-0
5129-0

    Author

    Questions??
    Click Here to contact us!

    Archives

    February 2021
    January 2021
    December 2020
    November 2020
    October 2020
    September 2020
    August 2020
    May 2020
    April 2020
    March 2020
    February 2020
    January 2020
    December 2019
    November 2019
    October 2019
    September 2019
    August 2019
    July 2019
    June 2019
    May 2019
    April 2019
    March 2019
    February 2019
    January 2019
    November 2018
    October 2018
    September 2018
    August 2018
    July 2018
    June 2018
    May 2018
    March 2018
    May 2016

    Categories

    All
    AFC CABLE
    Allied Tube
    Apelio
    Bell
    Bryant
    Caddy
    DMF
    Hubbell
    Ilsco
    Killark
    Klein
    Lutron
    NVent
    Prudential Lighting
    RACO
    Signify
    SP Products
    TayMac
    Wiegmann

    RSS Feed

© 2020 Thea Enterprises  All Rights Reserved 
380 Allwood Rd  Clifton, NJ 07012
Contact Us  - 973-472-4720
sales@theaenterprises.com
Click to set custom HTML
  • Home
  • Line Cards
    • Supplies
    • Lighting
  • Training
  • What's New
  • Catalogs
    • Digital Catalogs
  • COVID-19 Updates
  • Contact Us
  • About Us
  • Lighting